Motherboard |
Super X11DPFR-SN |
【Processor/Cache (per Node)】 |
|
CPU |
Dual Socket P (LGA 3647) |
|
2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, |
|
Dual UPI up to 10.4GT/s |
|
Support CPU TDP 70-165W with IVR |
Cores |
Up to 28 Cores |
Note |
BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R) |
【System Memory (per Node)】 |
|
Memory Capacity |
12 DIMM slots |
|
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM |
|
Supports Intel Optane DCPMM |
Memory Type |
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note |
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
|
Cascade Lake only. Contact your Supermicro sales rep for more info. |
【On-Board Devices】 |
|
Chipset |
Intel C621 chipset |
SAS |
SAS3 (12Gbps) via Broadcom 3008 |
Network Controllers |
Flexible networking via SIOM |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Graphics |
ASPEED AST2500 BMC |
【Input / Output (per node)】 |
|
SAS |
6 SAS3 (12Gbps) ports |
NVMe |
4 NVMe U.2 option |
LAN |
SIOM flexible Network card |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (rear) |
VGA |
1 VGA port |
【System BIOS】 |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
【Management】 |
|
Software |
Intel Node Manager |
|
IPMI 2.0 |
|
KVM with dedicated LAN |
|
SuperDoctor 5 |
|
Watch Dog |
Power Configurations |
ACPI Power Management |
【PC Health Monitoring】 |
|
CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
|
4+1 Phase-switching voltage regulator |
FAN |
Fans with tachometer monitoring |
|
Status monitor for speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
Thermal Control for fan connectors |
【Chassis】 |
|
Form Factor |
4U Rackmount |
Model |
CSE-F418BC2-R2K20BP |
【Dimensions and Weight】 |
|
Width |
17.63" (448mm) |
Height |
6.96" (177mm) |
Depth |
29" (737mm) |
Package |
28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight |
<Net Weight> 150 lbs (68.04 kg) |
|
<Gross Weight> 200 lbs (90.71 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
UID button |
LEDs |
Power status LED |
|
Hard drive activity LED |
|
Network activity LEDs |
|
Information LED (UID, Fan failure, Overheat) |
【Expansion Slots (per node)】 |
|
PCI-Express |
1 PCI-E 3.0 x16 (Low-profile) |
|
1 PCI-E 3.0 x16 (SIOM) |
【Drive Bays (per node)】 |
|
Hot-swap |
6 Hot-swap 2.5" SAS3/SATA3 or 2 Hot-swap 2.5" SAS3/SATA3 + 4 optional NVMe U.2 |
M.2 |
<M.2 Interface> PCI-E 3.0 x4 |
|
<M.2 Form Factor> 2260, 2280, 22110 |
|
<M.2 Key> M-Key |
【Backplane】 |
1 SAS/SATA backplane |
【System Cooling (per node)】 |
|
Fans |
3x 4cm 20k RPM middle fans |
【Power Supply】 |
2200W Redundant Power Supplies with PMBus |
Total Output Power and Input |
1200W with Input 100-127Vac |
|
1800W with Input 200-220Vac |
|
1980W with Input 220-230Vac |
|
2090W with Input 230-240Vac |
|
2200W with Input 220-240Vac (for UL/cUL use only) |
|
2090W with Input 230-240Vdc (for CCC only) |
AC Input Frequency |
50-60Hz |
Dimension(W x H x L) |
76 x 40 x 336 mm |
+12V |
<Max> 100A / <Min> 0A (100-127Vac) |
|
<Max> 150A / <Min> 0A (200-220Vac) |
|
<Max> 165A / <Min> 0A (220-230Vac) |
|
<Max> 174.17A / <Min> 0A (230-240Vac) |
|
<Max> 183.3A / <Min> 0A (220-240Vac) |
5VSB |
<Max> 1A / <Min> 0A |
Output Type |
Backplanes (gold finger) |
Certification |
Titanium Level |
【Operating Environment】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C ~ 35°C (50°F ~ 95°F) |
|
<Non-operating Temperature> -40°C to 60°C (-40°F to 140°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |