Motherboard |
Super X11DGQ |
【Processor/Cache】 |
|
CPU |
Dual Socket P (LGA 3647) |
|
2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, |
|
3 UPI up to 10.4GT/s |
|
Support CPU TDP up to 165W |
Cores |
Up to 28 Cores |
Note |
BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R). |
|
Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. |
【System Memory】 |
|
Memory Capacity |
12 DIMM slots |
|
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM |
|
Supports Intel Optane DCPMM |
Memory Type |
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note |
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
|
Cascade Lake only. Contact your Supermicro sales rep for more info. |
【On-Board Devices】 |
|
Chipset |
Intel C621 chipset |
SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
Network Connectivity |
Intel X540 Dual Port 10GBase-T |
|
Virtual Machine Device Queues reduce I/O overhead |
|
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Graphics |
ASPEED AST2500 BMC |
【Input / Output】 |
|
SATA |
4 SATA3 (6Gbps) ports |
LAN |
2 RJ45 10GBase-T ports |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (rear) |
Video |
1 VGA port |
Serial Header |
1 Fast UART 16550 header |
【System BIOS】 |
|
BIOS Type |
AMI 32Mb SPI Flash ROM |
【Management】 |
|
Software |
Intel Node Manager |
IPMI 2.0 |
KVM with dedicated LAN |
|
SSM, SPM, SUM |
|
SuperDoctor 5 |
|
Watch Dog |
Power Configurations |
ACPI / APM Power Management |
【PC Health Monitoring】 |
|
CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
|
4+1 Phase-switching voltage regulator |
FAN |
Fans with tachometer monitoring |
|
Status monitor for speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
Thermal Control for fan connectors |
【Chassis】 |
|
Form Factor |
1U Rackmount |
Model |
CSE-118GQETS-R2K05P2 |
【Dimensions and Weight】 |
|
Height |
1.7" (43mm) |
Width |
17.2" (437mm) |
Depth |
35.2" (894mm) |
|
39.3" (997mm) with rails |
Package |
24" (H) x 8" (W) x 46" (D) |
Weight |
<Net Weight> 45 lbs (20.4 kg) |
|
<Gross Weight> 58 lbs (26.31 kg) |
Available Color |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
Network activity LEDs |
|
System Overheat LED / Fan fail LED / |
|
UID LED |
【Expansion Slots】 |
|
PCI-Express |
4 PCI-E 3.0 x16 (FHFL) slots |
|
2 PCI-E 3.0 x16 (LP) slots |
【Drive Bays】 |
|
Hot-swap |
2 Hot-swap 2.5" SAS/SATA drive bays |
Fixed |
2 Internal 2.5" SATA drive bays |
M.2 |
Support 1x M.2 2242/2260/2280 |
|
Support M.2 SATA and NVMe |
【System Cooling】 |
|
Fans |
9 Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control |
【Power Supply】 |
2000W Redundant Power Supplies with PMBus |
Total Output Power |
<1000W> 100 - 120Vac |
|
<1800W> 200 - 220Vac |
|
<1980W> 220 - 230Vac |
|
<2000W> 230 - 240Vac |
|
<2000W> 200 - 240Vac (UL/CUL only) |
Dimension(W x H x L) |
73.5 x 40 x 265 mm |
Input |
100-120Vac / 12.5-9.5A / 50-60Hz |
|
200-220Vac / 10-9.5A / 50-60Hz |
|
220-230Vac / 10-9.8A / 50-60Hz |
|
230-240Vac / 10-9.8A / 50-60Hz |
|
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
+12V |
<Max> 83.3A / <Min> 0A (100-120Vac) |
|
<Max> 150A / <Min> 0A (200-220Vac) |
|
<Max> 165A / <Min> 0A (220-230Vac) |
|
<Max> 166.7A / <Min> 0A (230-240Vac) |
|
<Max> 166.7A / <Min> 0A (200-240Vac) (UL/cUL only) |
12Vsb |
<Max> 2.1A / <Min> 0A |
Output Type |
25 Pairs Gold Finger Connector |
Certification |
Titanium Level |
【Operating Environment】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C ~ 35°C (50°F ~ 95°F) |
|
<Non-operating Temperature> -40°C to 60°C (-40°F to 140°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |