Motherboard |
Super X10SRH-CLN4F |
【Processor】 |
|
CPU |
Intel Xeon processor E5-2600 v4/ v3, E5-1600 v4/ v3 family (up to 145W TDP **) |
|
Single Socket R3 (LGA 2011) |
Core / Cache |
Up to 22 Cores / Up to 55MB Cache |
Note |
BIOS version 2.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
【System Memory】 |
|
Memory Capacity |
8x 288-pin DDR4 DIMM slots |
|
Up to 1TB ECC 3DS LRDIMM |
|
Up to 512GB ECC LRDIMM |
|
Up to 256GB ECC RDIMM |
Memory Type |
2400/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes |
<3DS LRDIMM> 128GB |
|
<LRDIMM> 64GB, 32GB |
|
<RDIMM> 32GB, 16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C612 chipset |
SAS |
SAS3 (12Gbps) via Broadcom 3008 (IR mode) |
|
SW RAID 0, 1, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
ASPEED AST2400 BMC |
Network Controllers |
Intel i350-AM4 Quad Port Gigabit Ethernet |
|
Virtual Machine Device Queues reduce I/O overhead |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
1 Realtek RTL8201N PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 BMC |
【Input / Output】 |
|
LAN |
4 RJ45 Gigabit Ethernet LAN ports |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (rear) |
|
2 USB 2.0 ports (rear) |
VGA |
1 VGA port |
Serial Port / Header |
1 Fast UART 16550 port / 1 Header |
【Chassis】 |
|
Form Factor |
2U Rackmount |
Model |
CSE-826BE1C-R920LPB |
【Dimensions】 |
|
Width |
17.2" (437mm) |
Height |
3.5" (89mm) |
Depth |
25.6" (648mm) |
Package |
11.5" (H) x 26.5" (W) x 34" (D) |
Weight |
<Gross Weight> 58 lbs (26.3 kg) |
|
<Net Weight> 34 lbs (15.4 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power status LED |
|
Hard drive activity LED |
|
2x Network activity LEDs |
|
System Information LED |
|
Power fail LED |
【Expansion Slots】 |
|
PCI-Express |
1 PCI-E 3.0 x4 (in x8) slot |
|
1 PCI-E 3.0 x8 (in x16) slot |
|
2 PCI-E 3.0 x8 slots |
|
1 PCI-E 2.0 x2 (in x4) slot |
|
1 PCI-E 2.0 x4 (in x8) slot |
【Drive Bays】 |
|
Hot-swap |
12x 3.5" Hot-swap SAS3 HDD bays |
Optional |
2x 2.5" Hot-swap HDD bays (rear) |
【Backplane】 |
|
SAS3 Backplane |
SAS3 12Gbps single expander backplane, w/ LSISAS3x28 expander, support 12x 3.5" drives, with 4x mini-SAS HD connectors, 2 for uplink and another 2 for downlink |
【System Cooling】 |
|
Fans |
3x 8cm 9.5K RPM, 4-pin PWM fans |
Power Supply with Power Distributor |
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output |
4 Amp @ +5V standby |
|
75 Amp @ +12V |
Certification |
Platinum Certified |
【System BIOS】 |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP) |
|
APM 1.2 |
|
PCI 2.2 |
|
ACPI 1.0 / 2.0 |
|
USB Keyboard support |
|
SMBIOS 2.3 |
|
UEFI |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |