Host Ports |
1x CDFP PCIe Gen4 x16 Lane Ports |
Bus Interface |
PCIe 4.0 x16 |
Data Transfer Rate |
16GT/s per lane |
Number of Devices |
8x U.2/U.3/M.2 NVMe SSDs |
SSD Form Factor |
2.5 " U.2 |
Cooling System |
Dual, Ultra-Quiet 8025 Cooling Fans with Self-Monitoring & Manual Fan Control |
Fan controller interface |
Browser-Based management tool |
|
CLI (Command Line Interface- scriptable configuration tool) |
Material |
AL6061 Aluminum alloy |
Dimension |
9.25"W x 4.84"H x 8.27"D |
Enclosure Weight |
14.57 lbs |
Warranty |
3 Years |
Supported Operating System (Data RAID-Non Bootable) |
Windows 11 & 10 |
|
Windows Server 2022/Server 2019/Server 2016 |
|
Microsoft Hyper-V |
|
RHEL/Debian/Ubuntu/Fedora/Proxmox/Rocky Linux (Linux kernel 3.10 and later) |
ARM Platform Support (NVIDIA model) |
Yes(Linux) |
Boot RAID |
Windows 11 & 10 Windows Server 2022/Server 2019/Server 2016 Microsoft Hyper-V Linux kernel 3.10 and later |
System requirement |
CPU Navite PCIe Socket |
RAID Type |
Software |
RAID Support |
Single, RAID 0, 1, 10 |
RAID Feature |
SMTP Email Alert Notification |
|
Alarm Buzzer |
|
Storage Health Inspector |
|
NVMe SMART status |
|
Automatic and configurable RAID Rebuilding Priority |
|
Auto resume incomplete rebuilding after power on or reboot system |
Hotplug & Hotswap Support |
Yes |
Compliance Certification |
CE FCC RoHS REACH WEEE |
Front panel Status LED |
[Solid Red] Enclosure chipset hardware has exceeded the recommended temperature threshold (60 ℃), or the cooling system fan speed has dropped below the minimum threshold (100RPM) |
|
[Solid Yellow] Any of the PCIe, RAID, or HighPoint logo LEDs are not blue. |
|
[Solid Blue] All PCIe, RAID, HighPoint Logo LED are Blue. |
Front panel PCIe LED |
[Lights out] No driver installed or driver does not get PCIe information,such as device is not detected . |
|
[Solid Blue] Optimal PCIe speed |
|
[Blue light, flashing] Sub-optimal PCIe speed. |
Front panel RAID LED |
[Lights out] No driver is installed or the driver does not detect RAID. |
|
[Solid Red] RAID status is disabled. |
|
[Solid Blue] RAID status is normal. |
|
[Solid Yellow] RAID status is critical. |
|
[Blue light flashing] The RAID array is being initialized. |
|
[Yellow light flashing] The RAID array is being rebuilding. |
Front panel HighPoint Logo LED |
[Solid Blue] CDFP cable connect. |
|
[Yellow light flashing] CDFP cable disconnect. |
Front panel Tray LED |
[Lights out] The disk is not detected, or the disk adapter (U.2 to M.2) LED is not responding |
|
[Solid Blue] The disk is detected. |
|
[Blue light flashing] The disk is doing I/O. |
|
[Solid Red] The disk is failed. |
Back Panel Out of Band(OOB) |
[Ethernet Network port] 1 Ethernet RJ45 port, DHCP or static IP address assignment, dashboard and Web browser-based management UI device health |
|
[USB-C] Update the firmware version of the Enclosure chipset and check the device status. This function is realized according to the chipset selected by the selective switch. |
Back Panel Mute button |
Mute the internal enclosure alarm buzzer (cause of alarm sound host communication, internal ambient temperature is higher than warning temperature 55 ℃, fan speed is lower than warning fan speed 250 rpm or stops running) |
Back Panel CDFP |
Data transmission interface |
Back Panel Selective switch |
USB console and maintenance port dual mode [Left] Control M487 chip parameters. [Right] Control 88048 chip parameters |
Back Panel AC power input |
AC INPUT 100-240V ~ 5A 50/60Hz; DC OUTPUT 250W |
Back Panel Power Switch |
Enclosure power switch |
Back Panel Safety Lock |
Kensington Lock |
Temperature |
(operating) 5°C - 45°C |
|
(non-operating) -40°C - 65°C |
operating voltage |
PCI-e 12V, 3.3V |
Kit Contents |
1x Quick Installation Guide |
|
1x CDFP Cable |
|
1x 8-Bay Enclosure |
|
1x UL Power Cord |
|
8x Drive Trays |
|
40x 2.5 SSD mounting screws |
|
1x PCIe 4.0 x16 controller (external CDFP port) |
|
1x Low Profile Bracket |
Optional Accessories |
U.2 to M.2 Tray |