Motherboard |
Super X11SSD-F |
【Processor/Cache】 |
|
CPU |
Single Socket H4 (LGA 1151) supports |
|
Intel Xeon processor E3-1200 v6/v5, |
|
Intel 7th/6th Gen Core i3, |
|
Intel Pentium, |
|
Intel Celeron processors |
|
CPU TDP up to 80W |
Note |
BIOS version 2.0 or above is required to support Intel Xeon Processor E3-1200 v6 series or 7th Generation Intel Core Processors |
【System Memory (per node)】 |
|
Memory Capacity |
4x 288-pin DDR4 DIMM slots |
|
Supports up to 64 GB DDR4 ECC Un-Buffered memory (UDIMM) |
Memory Type |
2400MHz/2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs |
DIMM Sizes |
16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【Expansion Slots (per node)】 |
|
PCI-Express |
1 PCI-E 3.0 x8 Low-profile slot |
|
1 Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional |
【Network Devices (per node)】 |
|
Micro-LP NIC |
Intel i350 GbE controller |
|
Dual RJ-45 connectors |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Intel I/O Acceleration Technology (I/O AT) |
|
MicroLP Adapter Matrix (Networking options) |
【On-Board Devices (per node)】 |
|
Chipset |
Intel C236 chipset |
SATA |
SATA3 (6Gbps) via C236 controller |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM over LAN support |
|
ASPEED AST2400 BMC |
Headers |
1x Type A USB 3.0 |
Graphics |
ASPEED AST2400 Graphics (BMC with Graphic controller) |
【Input / Output (per node)】 |
|
SATA |
2 SATA3 (6Gbps) ports |
LAN |
2 RJ45 Gigabit Ethernet LAN ports |
|
1 RJ45 Dedicated IPMI LAN port |
DOM |
SATA DOM (Disk on Module) power connector support |
KVM |
1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle) |
【System BIOS】 |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
|
BIOS Features |
|
DMI 2.3 |
|
ACPI 1.0 / 2.0 |
|
USB Keyboard support |
|
SMBIOS 2.3 |
【Rear Window (each node)】 |
|
Switch |
Power / UID |
【Chassis】 |
|
Form Factor |
3U |
Model |
CSE-938BH-R1K68B |
【Dimensions and Weight】 |
|
Height |
5.21" (132.5 mm) |
Width |
17.26" (438.4 mm) |
Depth |
23.2" (589 mm) |
Package |
11.65" (H) x 26.26" (W) x 34" (D) |
Weight |
<Net Weight> 62.2 lbs (28.21 kg) |
|
<Gross Weight> 88 lbs (39.92 kg) |
Color |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
LEDs |
Power LED |
|
Node status LED |
【Drive Bays (per node)】 |
|
Internal |
2 Hot-swap 3.5" SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total |
|
Enterprise SATA HDD only recommended |
【System Cooling】 |
|
Fans |
4 Heavy duty 8cm fans with optimal cooling zone |
【Power Supply (76mm Width)】 |
1600W 1U Redundant Power Supplies with PMBus |
Total Output Power |
<800W> 100 - 140Vac |
|
<1600W> 180 - 240Vac |
Dimension(W x H x L) |
76 x 40.4 x 336 mm |
Input |
100-140Vac / 10-7A / 50-60Hz |
|
180-240Vac / 11-8A / 50-60Hz |
+12V |
<Max> 67A / <Min> 0A (100-140Vac) |
|
<Max> 133A / <Min> 0A (180-240Vac) |
+5Vsb |
<Max> 1A / <Min> 0A |
Output Type |
27 Pairs Gold Finger Connector |
Certification |
Titanium Level |
【PC Health Monitoring】 |
|
CPU |
Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. |
|
3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V |
FAN |
Cooling zone |
Temperature |
Monitoring for CPU and chassis environment |
【Operating Environment / Compliance】 |
|
RoHS |
|
|
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |