Motherboard |
Super X10SRi-F |
【Processor】 |
|
CPU |
Intel Xeon processor E5-2600 v4/ v3, E5-1600 v4/ v3 family (up to 145W TDP **) |
|
Single Socket R3 (LGA 2011) |
Core / Cache |
Up to 22 Cores / Up to 55MB Cache |
Note |
BIOS version 2.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
【System Memory】 |
|
Memory Capacity |
8x 288-pin DDR4 DIMM slots |
|
Up to 1TB ECC 3DS LRDIMM |
|
Up to 512GB ECC LRDIMM |
|
Up to 256GB ECC RDIMM |
Memory Type |
2400/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes |
<3DS LRDIMM> 128GB |
|
<LRDIMM> 64GB, 32GB |
|
<RDIMM> 32GB, 16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C612 chipset |
SATA |
SATA3 (6Gbps) via C612 controller |
|
RAID 0, 1, 5, 10 support |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
I |
PMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
ASPEED AST2400 BMC |
Network Controllers |
Intel i350-AM2 Dual Port Gigabit Ethernet |
|
Virtual Machine Device Queues reduce I/O overhead |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
1x Realtek RTL8201N PHY (dedicated IPMI) |
Video |
ASPEED AST2400 BMC |
【Input / Output】 |
|
SATA |
10x SATA3 (6Gbps) ports |
LAN |
2x RJ45 Gigabit Ethernet LAN ports |
|
1x RJ45 Dedicated IPMI LAN port |
USB |
2x USB 3.0 ports (2 rear) |
|
4x USB 2.0 ports (2 rear + 2 front) |
Video |
1x VGA port |
Serial Port / Header |
1x Fast UART 16550 serial port |
|
1x internal header |
DOM |
2x SuperDOM (Disk on Module) ports |
【PC Health Monitoring】 |
|
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN |
Total of 6 fan headers supporting up to 6 fans |
|
6 fans with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
PECI |
LED |
System Information LED |
|
Suspend static indicator LED |
|
UID/Remote UID |
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
RoHS, Halogen Free |
【Chassis】 |
|
Form Factor |
1U Rackmount |
Model |
CSE-813MTQ-350CB |
【Dimensions and Weight】 |
|
Height |
1.7" (43mm) |
Width |
17.2" (437mm) |
Depth |
19.8" (503mm) |
Package |
8.5" (H) x 24" (W) x 29.5" (D) |
Weight |
<Gross Weight> 30.4 lbs (13.8 kg) |
|
<Net Weight> 17.6 lbs (8 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
2x Network activity LEDs |
|
System Information LED |
【Expansion Slots】 |
|
PCI-Express |
1x PCI-E 3.0 x16 slot |
【Drive Bays】 |
|
Hot-swap |
4x 3.5" Hot-swap drive bays |
【Peripheral Drives】 |
|
Optional |
2x 2.5" Fixed drives internal |
【Backplane】 |
SAS/SATA HDD Backplane |
|
(SAS support requires optional SAS controller) |
【System Cooling】 |
|
Fans |
4x 40x28mm 4-pin PWM Cooling Fans |
【Power Supply】 |
350W AC power supply w/ PFC |
AC Voltage |
100-240 V, 50-60 Hz, 4.2-1.8 Amp |
+5V |
18 Amp |
+5V standby |
3 Amp |
+12V |
29 Amp |
+3.3V |
15 Amp |
Certification |
Gold Certified |
【System BIOS】 |
|
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
|
BIOS Features |
|
DMI 2.3 |
|
PCI 2.3 |
|
ACPI 1.0 / 2.0 |
|
USB Keyboard support |
|
SMBIOS 2.3 |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |