Motherboard |
Super X11DDW-NT |
【Processor/Cache】 |
|
CPU |
Dual Socket P (LGA 3647) |
|
2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, |
|
Dual UPI up to 10.4GT/s |
|
Support CPU TDP 70-205W |
Cores |
Up to 28 Cores |
Note |
BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R) |
【System Memory】 |
|
Memory Capacity |
12 DIMM slots |
|
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM |
|
Supports Intel Optane DCPMM |
Memory Type |
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note |
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
|
Cascade Lake only. Contact your Supermicro sales rep for more info. |
【On-Board Devices】 |
|
Chipset |
Intel C622 chipset |
SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
|
Network Controllers |
|
Dual 10Gbase-T LAN with Intel C622 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video |
ASPEED AST2500 BMC |
【Input / Output】 |
|
SATA |
12 SATA3 (6 Gbps) ports |
LAN |
2 RJ45 10GBase-T ports |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
4 USB 3.0 ports (rear) |
Video |
1 VGA port |
DOM |
2 SuperDOM (Disk on Module) ports |
【System BIOS】 |
|
BIOS Type |
AMI 32Mb SPI Flash ROM |
【Management】 |
|
Software |
Intel Node Manager |
|
IPMI 2.0 |
|
KVM with dedicated LAN |
|
SSM, SPM, SUM |
|
SuperDoctor 5 |
|
Watch Dog |
Power Configurations |
ACPI / APM Power Management |
【PC Health Monitoring】 |
|
CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
|
4+1 Phase-switching voltage regulator |
FAN |
Fans with tachometer monitoring |
|
Status monitor for speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
Thermal Control for fan connectors |
【Chassis】 |
|
Form Factor |
2U Rackmount |
Model |
CSE-826BAC4-R1K23WB |
【Dimensions and Weight】 |
|
Width |
17.2" (437mm) |
Height |
3.5" (89mm) |
Depth |
25.5" (648mm) |
Gross Weight |
64 lbs (29.0 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
UID button |
LEDs |
Power status LED |
|
HDD activity LED |
|
Network activity LEDs |
|
Universal Information (UID) LED |
【Expansion Slots】 |
|
PCI-Express |
1 PCI-E 3.0 x16 (FHHL) slot |
|
2 PCI-E 3.0 x8 (FHHL) slots |
|
2 PCI-E 3.0 x8 (LP) slots |
|
1 PCI-E 3.0 x16 for Add-on-Module (AOM) |
|
1 PCI-E 3.0 x4 NVMe M.2 slot |
|
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
【Drive Bays】 |
|
Hot-swap |
12 Hot-swap 3.5" SAS/SATA drive bays with SES2 and Mini-i-Pass (SFF 8087) connectivity |
【Backplane】 |
SAS/SATA HDD Backplane |
【System Cooling】 |
|
Fans |
3 High-performance 8cm PWM fans |
【Power Supply (76mm Width)】 |
1200W Redundant Power Supplies with PMBus |
Total Output Power |
1000W/1200W |
Dimension(W x H x L) |
76 x 40 x 336 mm |
Input |
100-127Vac / 15-12A / 50-60Hz |
|
200-240Vac / 8.5-7A / 50-60Hz |
|
200-240Vdc / 8.5-7A (for CCC only) |
+12V |
<Max> 83A / <Min> 0A (100-127Vac) |
|
<Max> 100A / <Min> 0A (200-240Vac) |
|
<Max> 100A / <Min> 0A (200-240Vdc) |
+5Vsb |
<Max> 4A / <Min> 0A |
Output Type |
19 Pairs Gold Finger Connector |
Certification |
Titanium Level |
【Operating Environment】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C ~ 35°C (50°F ~ 95°F) |
|
<Non-operating Temperature> -40°C to 60°C (-40°F to 140°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |