Motherboard |
Super X10SRA |
【Processor】 |
|
CPU |
Intel Xeon processor E5-2600 v4/ v3, E5-1600 v4/ v3 family or Intel Core i7 series (up to 160W TDP **) |
|
Single Socket R3 (LGA 2011) |
Core / Cache |
Up to 22 Cores / Up to 55MB Cache |
Note |
BIOS version 2.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
【System Memory】 |
|
Memory Capacity |
8x 288-pin DDR4 DIMM slots |
|
Up to 1TB ECC 3DS LRDIMM |
|
Up to 512GB ECC LRDIMM |
|
Up to 256GB ECC RDIMM |
|
Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only) |
Memory Type |
2400/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes |
<3DS LRDIMM> 128GB |
|
<LRDIMM> 64GB, 32GB |
|
<RDIMM> 32GB, 16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C612 chipset |
SATA |
SATA3 (6Gbps) via C612 controller |
|
RAID 0, 1, 5, 10 support |
Network Controllers |
Intel i210-AT Dual Port Gigabit Ethernet |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Audio |
RealTek ALC1150 High Definition Audio |
【Input / Output】 |
|
SATA |
10x SATA3 (6Gbps) ports via PCH |
LAN |
2x RJ45 Gigabit Ethernet LAN ports |
USB |
8x USB 3.0 ports (2 front + 6 rear) |
Audio |
7.1 HD Jacks |
Keyboard/Mouse |
1x PS/2 Keyboard/Mouse port |
Serial Port / Header |
1x header |
TPM |
1x TPM 1.2 20-pin Header |
【Expansion Slots】 |
|
PCI-Express |
4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8) |
|
2x PCI-E 2.0 x1 (in x4) slots |
|
PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed |
【System BIOS】 |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP) |
|
APM 1.2 |
|
DMI 2.3 |
|
PCI 2.3 |
|
ACPI 1.0 / 2.0 / 3.0 / 4.0 |
|
USB Keyboard support |
|
Hardware BIOS Virus protection |
|
SMBIOS 2.7.1 |
|
UEFI 2.3.1 |
|
RTC (Real Time Clock) Wakeup |
【Management】 |
|
Software |
SuperDoctor 5 |
|
SuperDoctor III |
|
Watch Dog |
Power Configurations |
ACPI Power Management |
|
Keyboard Wakeup from Soft-Off |
|
CPU Fan auto-off in sleep mode |
|
Power-on mode for AC power recovery |
【Chassis】 |
|
Form Factor |
Mid-Tower |
Model |
CSE-732D3-903B |
【Dimensions and Weight】 |
|
Height |
16.7" (424mm) |
Width |
7.6" (193mm) |
Depth |
20.68" (525.3mm) |
Weight |
<Gross Weight> 35.5 lbs (16.1kg) |
|
<Net Weight> 29.5 lbs (13.4 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
Network activity LED |
|
System Information LED |
Ports |
2x front USB 3.0 Ports |
|
2x front HD/AC97 Audio Ports |
【Drive Bays】 |
|
Internal |
4x 3.5" fixed drive bays |
|
Enterprise SATA HDD only recommended |
Peripheral |
2x 5.25" peripheral drive bays |
|
1x card reader module |
【System Cooling】 |
|
Fans |
1x 12cm front cooling fan |
【Power Supply】 |
900W AC multi output power supply |
AC Voltage |
100-240 V, 50-60 Hz, 10-6 Amp |
+5V Standby |
3 Amp |
+12V1 |
25 Amp |
+12V2 |
25 Amp |
+12V3 |
25 Amp |
+12V4 |
25 Amp |
+5V |
25 Amp |
+3.3V |
25 Amp |
-12V |
0.5 Amp |
Certification |
Gold Level |
Note |
Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. |
|
Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W. |
【PC Health Monitoring】 |
|
Voltage |
+12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT |
FAN |
Total of 5 fan headers supporting up to 5 fans |
|
5 fan headers with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
PECI |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |