Motherboard |
Super X11SSW-F |
【Processor/Cache】 |
|
CPU |
Single Socket H4 (LGA 1151) supports |
|
Intel Xeon processor E3-1200 v6/v5, |
|
Intel 7th/6th Gen Core i3, |
|
Intel Pentium, |
|
Intel Celeron processors |
|
CPU TDP up to 80W |
Note |
BIOS version 2.0 or above is required to support Intel Xeon Processor E3-1200 v6 series or 7th Generation Intel Core Processors |
【System Memory】 |
|
Memory Capacity |
4x 288-pin DDR4 DIMM slots |
|
Up to 64GB DDR4 ECC UDIMM |
Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes |
16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C236 chipset |
SATA |
SATA3 (6Gbps) via C236 controller |
|
RAID 0, 1, 5, 10 support |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
ASPEED AST2400 BMC |
Network Controllers |
Dual Intel I210-AT Gigabit Ethernet LAN ports |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Video |
ASPEED AST2400 BMC |
【Input / Output】 |
|
SATA |
6 SATA3 (6Gbps) ports |
LAN |
2 RJ45 Gigabit Ethernet LAN ports |
|
1 RJ45 dedicated IPMI LAN port |
USB |
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) |
|
6 USB 2.0 ports (2 rear + 4 headers) |
Video |
1 VGA port |
Serial Port / Header |
2 COM ports (1 rear, 1 header) |
SuperDOM |
2 SuperDOM (Disk on Module) ports with built-in power |
【PC Health Monitoring】 |
|
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN |
Total of 6 fan headers supporting up to 6 fans |
|
3 fans with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
Low noise fan speed control |
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
PECI |
LED |
System Information LED |
|
Suspend static indicator LED |
|
UID/Remote UID |
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
RoHS, Halogen Free |
【Chassis】 |
|
Form Factor |
1U Rackmount |
Model |
CSE-815TQC-R504WB |
【Dimensions and Weight】 |
|
Height |
1.7" (43mm) |
Width |
17.2" (437mm) |
Depth |
25.6" (650mm) |
Package |
23.5" (W) x 8.5" (H) x 33.7" (L) |
Weight |
<Net Weight> 24 lbs (10.9 kg) |
|
<Gross Weight> 35 lbs (15.9 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
Network activity LEDs |
|
System Information LED |
|
Information LED (temp., status) |
【Expansion Slots】 |
|
PCI-E |
1 PCI-E 3.0 x16 or 2x PCI-E x8 slots |
|
1 PCI-E 3.0 x4 (in x16 slot) |
M.2 |
<1x M.2 Interface> PCI-E 3.0 x4 and SATA |
|
<Form Factor> 2260, 2280, 22110 |
|
<Key> M-Key |
|
Double Height Connector |
【Drive Bays】 |
|
Hot-swap |
4 Hot-swap 3.5" SATA3 drive bays |
【Backplane】 |
SAS/SATA HDD Backplane |
|
(SAS support requires optional SAS controller) |
【System Cooling】 |
|
Fans |
4x 40x56mm counter-rotation fans |
|
Optional 2x 40x56mm counter-rotation fans |
【Power Supply with Power Distributor】 |
500W high-efficiency (94+%) power supply w/ PMBus |
With Power Distributor |
<+5V> 25 Amp |
|
<+3.3V> 12 Amp |
|
<-12V> 0.6 Amp |
Certification |
Platinum Certified |
【System BIOS】 |
|
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |