Motherboard |
Super X11SSH-TF |
【Processor/Cache】 |
|
CPU |
Single Socket H4 (LGA 1151) supports |
|
Intel Xeon processor E3-1200 v6/v5, |
|
Intel 7th/6th Gen Core i3 |
|
CPU TDP up to 80W |
Note |
BIOS version 2.0 or above is required to support Intel Xeon Processor E3-1200 v6 series or 7th Generation Intel Core Processors |
【System Memory】 |
|
Memory Capacity |
4x 288-pin DDR4 DIMM slots |
|
Up to 64GB DDR4 ECC UDIMM |
Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes |
16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C236 chipset |
SATA |
SATA3 (6Gbps) via C236 controller |
|
RAID 0, 1, 5, 10 support |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
ASPEED AST2400 BMC |
Network Controllers |
Dual Intel X550 10GBase-T LAN ports |
|
Virtual Machine Device Queues reduce I/O overhead |
|
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Video |
ASPEED AST2400 BMC |
【Input / Output】 |
|
SATA |
8 SATA3 (6Gbps) ports |
LAN |
2 RJ45 10GBase-T LAN ports |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) |
|
6 USB 2.0 ports (2 rear + 4 headers) |
Video |
1 VGA port |
Serial Port / Header |
2 COM ports (1 rear, 1 front) |
SuperDOM |
2 SuperDOM (Disk on Module) ports with built-in power |
【PC Health Monitoring】 |
|
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN |
Total of 6 fan headers supporting up to 6 fans |
|
4 fans with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
PECI |
LED |
System Information LED |
|
Suspend static indicator LED |
|
UID/Remote UID |
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
RoHS, Halogen Free |
【Chassis】 |
|
Form Factor |
1U Rackmount |
Model |
CSE-813MFTQC-350CB |
【Dimensions and Weight】 |
|
Height |
1.7" (43mm) |
Width |
17.2" (437mm) |
Depth |
19.85" (503mm) |
Package |
8.5" (H) x 24" (W) x 29.5" (D) |
Weight |
<Gross Weight> 30.4 lbs (13.8 kg) |
|
<Net Weight> 17.6 lbs (8 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
Network activity LEDs |
|
System Information LED |
【Expansion Slots】 |
|
PCI-E |
1 PCI-E 3.0 x8 |
M.2 |
<1x M.2 Interface> SATA and PCI-E 3.0 x4 |
|
<Form Factor> 2260 |
|
<Key> M-Key |
|
Double Height Connector |
【Drive Bays】 |
|
Hot-swap |
4 Hot-swap 3.5" SATA3 drive bays |
【Peripheral Drives】 |
|
Optional |
2 Fixed 2.5" internal drives |
【Backplane】 |
SAS3/SATA HDD Backplane |
|
(SAS support requires optional SAS controller) |
【System Cooling】 |
|
Fans |
4x 40x28mm 4-pin PWM Cooling Fans |
|
Optional 2x 40x28mm PWM fans |
【Power Supply】 |
350W AC power supply w/ PFC |
AC Voltage |
100-240 V, 50-60 Hz, 4.2-1.8 Amp |
+5V |
<Max.> 15 Amp |
|
<Min.> 0.2 Amp |
+5V standby |
<Max.> 3 Amp |
|
<Min.> 0 Amp |
+12V |
<Max.> 29 Amp |
|
<Min.> 0.5 Amp |
-12V |
<Max.> 0.2 Amp |
|
<Min.> 0 Amp |
+3.3V |
<Max.> 12 Amp |
|
<Min.> 0.2 Amp |
Certification |
Platinum Level Certified |
【System BIOS】 |
|
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> -40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |