Motherboard |
Super X11SSW-F |
【Processor/Cache】 |
|
CPU |
Single Socket H4 (LGA 1151) supports |
|
Intel Xeon processor E3-1200 v6/v5, |
|
Intel 7th/6th Gen Core i3, |
|
Intel Pentium, |
|
Intel Celeron processors |
|
CPU TDP up to 80W |
Note |
BIOS version 2.0 or above is required to support Intel Xeon Processor E3-1200 v6 series or 7th Generation Intel Core Processors |
【System Memory】 |
|
Memory Capacity |
4x 288-pin DDR4 DIMM slots |
|
Up to 64GB DDR4 ECC UDIMM |
Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes |
16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
【On-Board Devices】 |
|
Chipset |
Intel C236 chipset |
SATA |
SATA3 (6Gbps) via C236 controller |
|
RAID 0, 1, 5, 10 support |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
ASPEED AST2400 BMC |
Network Controllers |
Dual Intel I210-AT Gigabit Ethernet LAN ports |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Video |
ASPEED AST2400 BMC |
【Input / Output】 |
|
SATA |
6 SATA3 (6Gbps) ports |
LAN |
2 RJ45 Gigabit Ethernet LAN ports |
|
1 RJ45 dedicated IPMI LAN port |
USB |
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) |
|
6 USB 2.0 ports (2 rear + 4 headers) |
Video |
1 VGA port |
Serial Port / Header |
2 COM ports (1 rear, 1 header) |
SuperDOM |
2 SuperDOM (Disk on Module) ports with built-in power |
【PC Health Monitoring】 |
|
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN |
Total of 6 fan headers supporting up to 6 fans |
|
4 fans with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
PECI |
LED |
System Information LED |
|
Suspend static indicator LED |
|
UID/Remote UID |
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
RoHS, Halogen Free |
【Chassis】 |
|
Form Factor |
1U Rackmount |
Model |
CSE-514-R407W |
【Dimensions and Weight】 |
|
Height |
1.7" (43mm) |
Width |
17.2" (437mm) |
Depth |
16.9" (429mm) |
Package |
23.8" (W) x 8" (H) x 27" (L) |
Weight |
<Gross Weight> 27 lbs (12.25 kg) |
|
<Net Weight> 15.5 lbs (7.03 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power LED |
|
Hard drive activity LED |
|
2 Network activity LEDs |
|
System Information LED |
|
Information LED (temp., status) |
【Expansion Slots】 |
|
PCI-Express |
<Left riser slot> 1 PCI-E 3.0 x16 or 2 PCI-E 3.0 x8 |
|
1 PCI-E 3.0 x4 (in x8 slot) |
M.2 |
<1x M.2 Interface> PCI-E 3.0 x4 and SATA |
|
<Form Factor> 2260, 2280, 22110 |
|
<Key> M-Key |
|
Double Height Connector |
【Drive Bays】 |
|
Internal |
2 fixed 2.5" drive bays |
【System Cooling】 |
|
Fans |
4x 40x56mm PWM Cooling Fans |
|
2x Optional fans for AOC cooling |
【AC/DC240V Input Redundant Power Supplies】 |
400W 1U Redundant Power Supplies with PMbus |
Total Output Power |
400W |
Dimension(W x H x L) |
54.5 x 40 x 220 mm |
Input |
100 - 240Vac / 6.0 - 3.0A / 50-60Hz |
|
200 - 240Vdc / 3.4 - 3.2A (CCC Only) |
+12V |
<Max> 33A / <Min> 0.5A |
+5V sb |
<Max> 3A / <Min> 0A |
Output Type |
Gold Finger Connector Mating with Molex 45984-4343 |
Certification |
Platinum Level Certified |
【System BIOS】 |
|
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
【Operating Environment / Compliance】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C to 35°C (50°F to 95°F) |
|
<Non-operating Temperature> 40°C to 70°C (-40°F to 158°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |