Motherboard |
Super X11DPH-T |
【Processor/Cache】 |
|
CPU |
Dual Socket P (LGA 3647) |
|
2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, |
|
3 UPI up to 10.4GT/s |
|
Support CPU TDP 70-205W |
Cores |
Up to 28 Cores |
Note |
BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R) |
【System Memory】 |
|
Memory Capacity |
16 DIMM slots |
|
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM |
|
Supports Intel Optane DCPMM |
Memory Type |
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note |
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
|
Cascade Lake only. Contact your Supermicro sales rep for more info. |
【On-Board Devices】 |
|
Chipset |
Intel C622 chipset |
SAS |
SAS3 (12Gbps) via Broadcom 3008 AOC |
|
Broadcom 3008 controller |
SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
Network Controllers |
Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Graphics |
ASPEED AST2500 BMC |
【Input / Output】 |
|
LAN |
2 RJ45 10GBase-T LAN ports |
|
1 RJ45 Dedicated IPMI LAN port |
USB |
4 USB 3.0 ports (rear) |
|
1 Type A |
VGA |
1 VGA port |
Serial Port / Header |
1 Fast UART 16550 port / 1 Header |
【System BIOS】 |
|
BIOS Type |
256Mb AMI UEFI |
【Management】 |
|
Software |
Intel Node Manager |
|
IPMI 2.0 |
|
NMI |
|
SPM, SUM |
|
SuperDoctor 5 |
|
Watchdog |
【PC Health Monitoring】 |
|
CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
|
4+1 Phase-switching voltage regulator |
FAN |
Fans with tachometer monitoring |
|
Status monitor for speed control |
|
Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment |
|
Thermal Control for fan connectors |
【Chassis】 |
|
Form Factor |
4U Rackmount |
Model |
CSE-847BE1C4-R1K23LPB |
【Dimensions】 |
|
Width |
17.2" (437mm) |
Height |
7" (178mm) |
Depth |
27.5" (699mm) |
Weight |
<Gross Weight> 102.5 lbs (46.4 kg) |
|
<Net Weight> 65.5 lbs (29.7 kg) |
Available Colors |
Black |
【Front Panel】 |
|
Buttons |
Power On/Off button |
|
System Reset button |
LEDs |
Power status LED |
|
Hard drive activity LED |
|
Network activity LEDs |
|
System Information LED |
|
Power fail LED |
【Expansion Slots】 |
|
PCI-Express |
3 PCI-E 3.0 x16 slot |
|
4 PCI-E 3.0 x8 slots |
|
Slot 2 & 3 occupied by controller and JBOD Expansion Port |
【Drive Bays】 |
|
Hot-swap |
36 Hot-swap 3.5" SAS3/SATA3 drive bays |
|
2 Hot-swap 2.5" SATA3 drive bays (rear) |
Optional |
4 U.2 NVMe |
|
2 M.2 NVMe |
【Backplane】 |
SAS3/SATA3 single expander per backplane |
【System Cooling】 |
|
Fans |
3 Hot-swap 8cm redundant PWM cooling fans |
|
2 Hot-swap 8cm rear exhaust PWM fans |
|
Redundant cooling |
【Power Supply (76mm Width)】 |
1200W Redundant Power Supplies with PMBus |
Total Output Power |
1000W/1200W |
Dimension(W x H x L) |
76 x 40 x 336 mm |
Input |
100-127Vac / 15-12A / 50-60Hz |
|
200-240Vac / 8.5-7A / 50-60Hz |
|
200-240Vdc / 8.5-7A (for CCC only) |
+12V |
<Max> 83A / <Min> 0A (100-127Vac) |
|
<Max> 100A / <Min> 0A (200-240Vac) |
|
<Max> 100A / <Min> 0A (200-240Vdc) |
+5Vsb |
<Max> 4A / <Min> 0A |
|
Output Type |
|
19 Pairs Gold Finger Connector |
Certification |
Titanium Level |
【Operating Environment】 |
|
RoHS |
RoHS Compliant |
Environmental Spec. |
<Operating Temperature> 10°C ~ 35°C (50°F ~ 95°F) |
|
<Non-operating Temperature> -40°C to 60°C (-40°F to 140°F) |
|
<Operating Relative Humidity> 8% to 90% (non-condensing) |
|
<Non-operating Relative Humidity> 5% to 95% (non-condensing) |