商品スペック
| Bus Interface | PCI-Express 3.0 x16 |
|---|---|
| Number of Channel / Port | 8x M.2 NVMe port (Dedicated PCIe 3.0 x4 per port) |
| Port Type | 8x M.2 NVMe |
| Data Transfer Rate | 8GT/s |
| Number of device | 8x M.2 NVMe SSD |
| SSD Form Factor | 2242/2260/2280 (supports single & double sided) |
| External Power Support | Yes (Use 6pin PCIe Power Connector) |
| Form Factor | Full-Height |
| Card Dimensions | 11.18"(W)*4.41"(H)*0.94"(D) |
| Card Weight | 1.70lbs |
| Warranty | 2 Years |
| Windows | Windows 11, 10 Windows Server 2022, 2019, 2016 Microsoft Hyper-V Only supports 64 bit operating system. |
| Linux | RHEL/Debian/Ubuntu/Fedora/Proxmox/Rocky Linux(Linux kernel 3.10 and later) Only supports 64 bit operating system. |
| macOS | macOS 10.13 ~ macOS 14.x |
| System Requirements | Mac Platforms・Apple Mac Pro Systems 2012 and later Mac Pro systems; MacPro5,1; MacPro7,1 (2019); Mac14,8 (2023)・Intel & Apple M1 & Apple M2 Platform compatible |
| PC Platforms・Any PC Systems or Motherboard with an industry standard PCIe x16 physical Slot (Bifurcation is not required) | |
| Secure Boot(PC platforms) | [Windows] Support Secure Boot enable and disable Linux Support Secure Boot disable |
| Cooling System | Full-length anodized aluminum heat sink with built-in Low-Noise fans |
| Fan Control | Yes (Windows, Mac) |
| RAID Support | Single, RAID 0, 1, 10 |
| TRIM RAID Support | Single, RAID 0, 1, 10 |
| Data RAID(Non-Bootable) | Windows, Linux, Mac (Linux Driver can be installed via internet/network connection) |
| Boot RAID | [Windows] Not supported |
| [Linux] Not supported | |
| [Mac] Bootable using one (non-RAID) M.2 SSD as the boot drive. Only supports up to macOS 10.15. | |
| Management Suites | WebGUI (Browser-Based management tool ) |
| CLI (Command Line Interface- scriptable configuration tool) | |
| API package | |
| SMTP Email Alert Notification | Yes |
| Alarm Buzzer | Yes |
| Storage Health Inspector | Yes |
| NVMe SMART status | Yes |
| Automatic and configurable RAID Rebuilding Priority | Yes |
| Auto resume incomplete rebuilding after power on or reboot system | Yes |
| Single-RAID or Multi-RAID Arrays per Controller | Yes |
| Cross-Sync RAID Solution Across Controllers | Yes (Windows, Linux) |
| Flash ROM for Upgradeable UEFI | No |
| Bootable RAID Array | No |
| Multiple RAID Partitions supported | Yes |
| Online Array Roaming | Yes |
| RAID Quick Initialization for fast array setup | Yes |
| Global Hot Spare Disk support | Yes |
| Work Temp | +5°C ~ + 55°C |
| Storage Temp | -20°C ~ +80°C |
| Operating Voltage | PCI-e 12V, 3.3V |
| Power | Typical 7.16W |
| MTBF (Mean Time Before Failure) | 920,585 Hours |
| Certification / Approval | CE, FCC, RoHS, REACH, WEEE |
| Kit Contents | 1x SSD7140A |
| 1x Quick Installation Guide |





